Projects etc Pty Ltd日本

The area of Functional Safety covers the design, development,verification, validation and on-going "maintenance" of Hardware and/or Software (and Communications Systems if applicable) for all phases of the product lifecycle where SAFETY relies upon "safety functions" that are carried out by electrical/electronic/programmable electronic safety-related system (E/E/PES). Projects etc Pty., Ltd provides a full range of Services for Functional Safety under the 61508 (generic series of standards (Hardware and Software) and Industry Sector Derivative stds for Machinery (IEC 62061, ISO 13849), Process Industry (IEC 61511), Furnace Control Systems (EN50156), Medical (IEC 60601, ISO14971 & IEC 62304), Railways (EN50126.128/129), Earth Moving Equipment (ISO 15998), Lift Controls (ISO 22201), Electrical Drives (IEC 61800-5-2) Automotive Functional Safety (ISO 26262) and related standards including Comms Systems and Fieldbuss Functional Safety stds (e.g. IEC 61784-3).........COMING SOON EN 50556 (Road Traffic Signals)...

Through our "trading as" name of Safety Related Control Systems Projects etc Pty., Ltd., is a NATA Accredited "Type A" (Independent) Inspection Body for Functional Safety under ISO 17020. See our scope of accreditation on the NATA Web Site (www.nata.com.au) under accreditation number 17171

The area of Electrical Safety and Machinery Safety covers the SAFE design and implementation, based on a Risk Assessment approach, of Equipment and Industrial Plant to a level of acceptable residual risk when used in the the manner intended by the designer/manufacturer and in a manner of foreseeable misuse.

Safeguarding by appropriate design and implementation against hazards such as electric shock and hazards such as those caused by fire, mechanical movements, toxic emissions/leakages, potentially hazardous radiation (e.g. lasers), temperatures, pressures, unsafe movements due to -for example faults in the safety control circuitry or external radio frequency interference etc - is the aim and this is achieved by utilization of various European, Australian, American and International safety standards to achieve this goal. Projects etc Pty., Ltd., provide a full range of services for Electrical and Machinery Safety under AS/NZS 3820 (Essential safety requirements for LV Electrical Equipment) / AS/IEC 60204-1 (Electrical Equipment of Machines ) / NFPA 79 (Electrical Std for Industrial Machinery) / IEC 61131-2 (PLC's) / IEC 61800-5-1 (Adjustable Speed Drives) / AS 4024 series (Safety of Machinery) / ISO 10218-1 (Robots for Industrial Environments) / AS 1755 (Conveyors - Safety Requirements) plus the full range of EN Harmonised stds for the EU Machinery Directive and LVD - additionally the SEMI Guidelines e.g. S2 (Safety), S22 (Design), S8 (Ergonomics), S10 (Risk Assessment) etc are also covered.

Through our "trading as" name of "Safety Related Control Systems" Projects etc Pty., Ltd., is a NATA Accredited "Type A" (Independent) Inspection Body for Electrical Safety/Machinery Safety and Designated EU Notified Body for the EU Low Voltage Directive (2006/95/EC) and EU Machine Directive (2006/42/EC)under the EU/Aust MRA (Official Notified Body Number is 2241 - click here to see EU Commission Web Site). See our scope of accreditation on the NATA Web Site (www.nata.com.au) under accreditation number 17171

The area of EMC (Electromagnetic Compatibility) covers determination of whether the radio frequency emissions generated by active components within electrical/electronic equipment is within the allowable limits for such emissions and whether the subject equipments level of susceptibility, to outside radio frequency interference, is acceptable - based on limits outlined in various International, European, Australian and American EMC generic and product specific standards. Projects etc Pty., Ltd., provides a full range of services for EMC including the areas covered by IEC 61326-3-1 (FS Immunity - Gen Ind) / IEC 61326-3-2 (FS Immunity - Specified Environ) / IEC 62061 (Annex E - FS Increased Immunity) / SEMI Guideline E33 (Facitity EMC) / EU CE-Marking & Aust C-Tick (EMC Generic and Product Stds). EMC Testing for Immunity is very closely linked with Functional Safety assessments - the SAFE BEHAVIOUR of the equipment when subjected to external interference is of paramount importance and along with rigourous climatic and vibration testing (IEC 60068 series) forms a major part of any Functional safety assessment.

Through our "trading as" name of "Safety Related Control Systems" Projects etc Pty., Ltd., is a NATA Accredited "Type A" (Independent) Inspection Body for EMC , a Designated EU Notified Body for the EU EMC Directive (2004/108/EC) under the EU/Aust MRA (Official Notified Body Number is 2241 - click here to see EU Commission Web Site) and a Designated Competent Body for the Aust EMC Framework (C-TICK) Regulations. See our scope of accreditation on the NATA Web Site (www.nata.com.au) under accreditation number 17171

Projects etc Pty., Ltd., provide a full range of services for the EU CE-Marking Directives including.......the EU Machinery Directive, Low Voltage Directive, EMC Directive, Recreational Craft Directive, Pressure Equipment Directive, Simple Pressure Vessel Directive, RTTE Directive, A-TEX Directive....PLUS.....
Through our "trading as" name of "Safety Related Control Systems" Projects etc Pty., Ltd., is a NATA Accredited "Type A"(Independent) Inspection Body for Electrical Safety/Machinery Safety/EMC and a Designated EU Notified Body for the EU Low Voltage Directive (2006/95/EC), EU Machine Directive (2006/42/EC) and EU EMC Directive (2004/108/EC) under the EU/Aust MRA (Official Notified Body Number is 2241 - click here to see EU Commission Web Site). See our scope of accreditation on the NATA Web Site (www.nata.com.au) under accreditation number 17171. Other EU Directives are covered via our co-operation with EU based Notified Body Partners.....